SA-A34-HT ONE™ TITAN™ V2 Custom Carabiner Replica - Half Brown

Description

SA-A34-HT ONE™ TITAN™ V2 custom carabiner replica

Limited version of the replica with TITAN™ V2 Advanced chip from the GATE brand installed!

The TITAN™ V2 Drop-In mosfet controller kit transforms your AEG into an advanced training replica. It gives you a tactical advantage with lightning-fast trigger response and the ability to modify the replica and customise it for any mission with 20 available functions. This is GATE's most advanced and highest quality model.

The TITAN™ V2 controller breathes a whole new life into the ASG electric replica.

TITAN™ gives you new possibilities:

- Setting the trigger sensitivity
- Increased preload (shortens the time from pressing the trigger to firing)
- Setting the fire selection modes
- Serial fire mode
- Setting the firing rate
- Setting the firing rate
- Low battery warning
-. Protects the battery from damage
- "Sniper delay"
- Full cycle detection
- AUG mode - two trigger sensitivities can be set (single and continuous fire)

Complete layout description: https://gunfire.com/pl/products/zestaw-kontrolera-titan-tm-v2-advanced-set-rear-wired-1152218717.html

The SA-A34 carbine replica from Specna Arms is predominantly made of a uniform zinc-aluminium alloy, with steel elements being used in the most critical areas of the replica (all screws, pins and the tactical suspension are made of steel). The buttstock and pistol grip are made of polymer plastic. The body of the replica and the RIS rail mount have been anodised, which guarantees a high level of corrosion protection for the replica. The replica itself was painted in Powder process after the surface has been sandblasted. This makes the applied colour much more abrasion-resistant than usual.

The rifle is very well fitted and perfectly balanced - something that is almost only known from manufacturers of the G&P or Classic Army class. This ensures almost ideal manoeuvrability of the replica, while the weight is also barely noticeable as soon as the replica rests against the shoulder.

The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's performance to the expected battlefield conditions without the need for access to a workshop or a range of specialised tools - after removing the gearbox from the replica's body, the actual spring change takes literally seconds.

The advantages of the Enter & Convert™ system can hardly be overestimated. Given the prevailing tendency throughout Europe to legally limit the firing speed of replicas and the regulations that exist in the environments themselves, this system guarantees the user considerable possibilities and a high degree of freedom. The Enter & Convert™ system allows a minimum of time for replacing the main spring and thus the adjustment of the replica's exit speed to the playing area in order to ensure an ideal compromise between the effectiveness of the weapon and the safety of oneself and other players.

The replica has been fully adapted for operation with LiPo and LiFe batteries. With an initial discharge rate of ~410 FPS guaranteed by the pre-installed main spring, the replica is perfectly suited for medium-range shooting. A M90 type spring is also included, which allows the initial speed to be reduced to ~310 FPS, making the replica perfect for short distance or indoor use.

The gearbox, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the Enter & Convert™ system and is mounted on the cylinder head. 8mm ball bearingsh and washers Steel gears is mounted. The system is secured against reversing by four locking pawls. The lightweight plastic piston made of polycarbonate is fitted with a steel tooth to increase its strength. In addition Cylinder type 2 and Steel breakerand Metal hop-up chamber used.

The improved version has a number of new reinforced parts such as:

- a set of reinforced steel gears
- a steel spring guide
- a lightweight polymer piston
- a sealed aluminium piston head
- a metal cylinder head
- a sealed metal nozzle

The upgraded version is equipped with a 22 mm dorsal RIS rail, a set of front MLOK rails and an adjustable SF piston. A folding sight is mounted on the upper RIS rail, but this can be replaced by an optoelectronic sight as required. Thanks to the sliding buttstock, which is fitted with a non-slip base, the length of the replica can be adapted to the shooter's build and preferences. The flame suppressor is mounted on a 14 millimetre left-hand thread which allows a silencer to be fitted in its place.

For more realism in the game, the replica was also equipped with a actuated shutter release equipped.

The replica also comes with a hi-cap steel magazine that holds 300 rounds.

The Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

Battery and charger are not included in the scope of delivery.

The kit includes:

- Replica with TITAN™ V2 chip installed
- USB port for controlling the device via the GATE Control Station app
- Magazine
- Mechanical sighting instruments
- Additional tension spring

.