TITAN™ V2 Expert Blu-Set Controller Set [rear wired]

TITAN™ V2 Expert Blu-Set Controller Set [Rear Wired]

Drop-In MOSFET Type TITAN™ V2 Controller Set transforms an AEG into an advanced training replica. It provides a tactical advantage thanks to a lightning-fast trigger response and the ability to modify the replica and customise it for any mission using 20 available functions. This is the most advanced and best model of GATE.

TITAN™ V2 control unit will breathe new life into an ASG electric replica.

TITAN module in EXPERT version Features that allow access to all software functions via the GATE Control Station

In addition to the module, the set also contains a Blu-Link-module:

- Extends TITAN / ASTER systems with the Bluetooth® function
- enables wireless connection between GATE ETU and compatible GATE Ecosystem devices
- Compatible with the GCS app for iOS, Android and in the near future also Windows / macOS
- Enables switching between data transmission mode and fire mode via the app
- Configurable, intelligent fuse (UVP, SCP, OCP, OTP) that protects the battery in the event of a short circuit and protects the system from overheating or overvoltage
- Multifunctional wattmeter that enables telemetric data to be read off
- Coating in accordance with MIL-V-173C specification
- Very low energy consumption
- offers full mobility - no cables required to connect the system to the GCS app
- enables programming, setting changes and TITAN / ASTER software updates in data transfer mode via the GCS app
- can be connected between ETU and battery for the entire duration of a game (unlike USB-Link, which must be disconnected for configuration)

TITAN™ offers new possibilities:
- Setting the trigger sensitivity
- Preload amplification - adjustment of the time the spring is held pulled (shortens the time between pulling the trigger and firing)
- Setting the fire mode selection modes
- Burst mode
- Setting the firing rate setting
- Low battery notification
- Protecting the battery from damage
- "Sniper delay"
- Full cycle detection
- AUG mode - the option to set two trigger sensitivities (semi and full-auto)

More comprehensive description of the TITAN™ controller:

TRIGGER sensitivity setting
Five sensors that enable the trigger sensitivity to be controlled. The replica does not need to be disassembled, it is sufficient to use the Tactical Programmer Card or the GATE™ Control Station. It allows the replica to be customised to the capabilities and individual preferences of the user.

CONFIGURABLE FIRE MODE SELECTOR (GEN. 2)
Two sensors can be programmed in three ways to select one of 6 functions:
- SAFE-SEMI-AUTO
- SAFE-SEMI-SEMI
- SAFE-SEMI-BURST*
- SAFE-BURST*-CAR
- SAFE-SEMI-BURST*/AUTO (short press and hold - BURST, long press and hold AUTO)
- SAFE-BURST*-AUTO (SAFE via a quick mode selection, if: SAFE-SEMI-SAFE)
*BURST means the firing of a series of shots.

CYCLE DETECTION
The TITAN™ control unit can precisely recognise the position at which a cycle should end. This means that pulling the trigger completes a full firing cycle (replicas without the TITAN™ system often jam if the trigger is pulled too short and does not end with a shot. TITAN™ eliminates this error).
The result:
- Automatic BURST mode, with this series the cycle time does not need to be set, only the number of BBs to be fired needs to be specified
- Automatic pre-cocking available in each mode in the following fire mode selector settings: SEMI BURST and AUTO. Unlike conventional MOSFET modules, this setting does not need to be configured manually. Only the power of the spring preload needs to be set.
- ALWAYS FULL CYCLE - when the preload is switched off, TITAN™ ensures that the gear runs through a full cycle and the spring is released after firing. This ensures greater reliability of the replica.

PRECOMMENDATION (Gen.2*)
Winning a duel often comes down to fractions of a second. This is why the trigger reacts at a speed comparable to that of a real firearm thanks to the preload. As the spring is pulled beforehand, it is also pointed out that using this mode with strong springs leads to faster wear of the internal parts of the replica.
There are two modes of the PRE-COCKING function:
1. AUTO - the spring is pulled after each shot
2. SMART - the spring is preloaded by pulling the trigger slowly and a shot is fired by pulling it quickly.
Three operating modes can be programmed for PRE-COCKING can be set: HIGH / MID / LOW - each regulates the spring tension in different stages

*PRE-COCKING mode now works in all fire mode selection modes: SEMI, BURST, AUTO and does not require manual calibration

BURST (Gen.2)
BURST mode, i.e. the firing of a pre-programmed series of shots, only requires the selection of the Quantity of cartridges to be fired (up to 10 cartridges per trigger). It is very useful in all MILSIMs or when using real low capacity magazines.

ROF CONTROL
This allows the rate of fire of the replica to be reduced. This makes it possible to use more powerful Li-Po batteries and still achieve a rate of fire that is in line with real firearms.

ROF STAB
Enables the functionality of ROF CONTROL to be changed:
- ON - RoF Control regulates the speed of the cycle, which enables smooth operation of the gearbox and less wear on the internal parts of the replica
- OFF - RoF Control adds pauses between each shot to reduce the rate of fire. This provides a very realistic experience.

SNIPER DELAY
This function allows you to set a delay between each shot in SEMI mode to simulate a reload delay or recoil compensation. It is possible to set the following delays: 0.5 s, 1.0 s, 2.0 s and 3.0 s.

A detailed description of all functions is available on the manufacturer's website: http://www.gatee.eu/

The complete manual is available at the following address:

http://gatee.eu/images/gate/instrukcje/titan-pl.pdf

The set contains:

- TITAN drop-in module in ADVANCED firmware version
- Blu-Link
- Mounting kit
- Quick Start Guide (English)
- TITAN Patch