SA-B05 ONE™ SAEC™ System Carabiner Replica

SA-B05 SAEC™ System Assault Rifle Replica

SA-B05 Assault rifle replica from Specna Arms is mostly made of a uniform zinc and aluminium alloy, reinforced with steel elements in the most sensitive areas of the replica (steel elements - all screws, pins and tactical sling swivels). Both the SF stock, which houses the battery, and the pistol grip are made of polymer. The receiver of the replica and the RIS handguard were the process of anodising, which guarantees a high level of protection against corrosion. The paint was applied using a powder coating process after the surface has been sandblasted before the colour is applied. This makes the applied colour much more resistant to abrasion than usual. The receiver bears USMC markings.

The parts of the replica are very well matched - the replica is also perfectly balanced in a way that was previously only seen in replicas from top manufacturers such as G&P or Classic Army. This allows for almost ideal manoeuvrability of the replica and the weight is hardly noticeable once you have shouldered the replica.

The replica has a New generation quick-release system, the so-called SAEC™. Thanks to this system, it is possible to quickly and easily adjust the performance of the replica to the expected conditions on the pitch without having to have access to a workshop or a set of special tools. The spring change is even faster than the previous version of the system.

Thanks to the SAEC™ system, it is It is not necessary to remove the gearbox from the replica- it is enough to remove the shaft slider (no tools are needed - it is fixed with a tightened ring and a latch), then it is necessary to unscrew the pin located under it together with a spring slider on bearings. We replace the main spring, screw the pin back into the body, attach the shaft and... we're back in the game! The whole process only takes a moment and, to reiterate, does not require any tools.

The advantages of the SAEC™ system can hardly be overestimated. Given the current tendency throughout Europe to use legal restrictions on the muzzle velocity of replicas or internal regulations within different groups, the system guarantees the user a wide range of options and a great deal of freedom. The SAEC™ system enables the main spring with a minimum of time and thus adapt the muzzle velocity to the playing area in such a way that an ideal compromise between the effectiveness of the fire and the safety of the user himself and the other participants is guaranteed.

The replica is fully compatible with LiPo and LiFe Batteries. Due to the basic muzzle velocity of ~430 FPS The main spring fitted as standard by the manufacturer makes the replica perfect for use at medium distances. The set also includes a M90 spring, which makes it possible to reduce the muzzle velocity to ~310 FPS and thus adapt the replica for use at close range and indoors.

A reinforced gearbox at cylinder level contains a steel spring slider, which is an element of the SAEC™ system and is mounted on 8 mm ball bearing and washers Steel gears. The system is secured with four reversible locks. A lightweight polymer flask made from polycarbonate is fitted with a set of steel teeth to increase its durability. The following have also been implemented one type 2 cylinder and a steel circuit-breakerand one metal hop-up chamber.

The updated version offers a range of new, reinforced parts such as:

- Set of reinforced steel gears
- Bearing-mounted steel spring slider
- Light polymer flask with steel band
- Aluminium-reinforced piston head
- Metal cylinder head
- Reinforced metal nozzle

The replica is equipped with a 22 mm RIS rail, a RIS handguard and an adjustable stock. The upper RIS rail has a folding metal sight that can be freely removed to create space for attaching an optoelectronic aiming device of your choice. The extendable stock with non-slip stock pad makes it possible to adjust the length of the replica to the user's build and preferences. A standard flash hider is based on a 14 mm left-hand threadwhich allows a silencer to be fitted in its place.

To increase the realism of the game, the replica also features a functioning bolt catch mechanism.

The replica is supplied with a 300 BB Hi-Cap magazine made of steel.

Specna Gun replicas are compatible with many magazines available on the market, from manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

SAEC™ system is included in the European patent with a number: 002639500

Additional accessories shown in the preview pictures are not part of the set!

The set does not include a battery or charger.

The set contains:

- Replica
- Magazine
- Fixed iron sights
- additional mainspring

ATTENTION:

According to the report number HKGEC1600157401, the product fulfils the requirements of the European Union RoHS - Restriction of Hazardous Substances 2011/65/EU Directive Annex II, which amends 2002/95/EC on the restriction of hazardous substances in electronics.

This means that Specna Weapons Free from harmful materials how:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
– polybrominated Biphenyl (PBB)
– polybrominated Diphenyl ether (PBDE)