Specna Arms SA-B11 ONE™ URX SAEC™ System carbine replica

Specna Arms SA-B11 URX SAEC™ System Assault Rifle Replica

SA-B11 assault rifle replica from Specna Arms is largely made of a uniform zinc and aluminium Aluminium-Alloy, reinforced with steel elements in the most sensitive areas of the replica (steel elements - all screws, pins and tactical sling swivels). Both the SF stock, which houses the battery, and the pistol grip are made of polymer. The receiver of the replica and the RIS handguard were the process of anodising, which guarantees a high degree of protection against corrosion. The colour was Powder coating process after the surface has been sandblasted before the colour is applied. This ensures a much higher abrasion resistance of the applied paint than usual. The receiver bears USMC markings.

The parts of the replica fit together very well - in a way that has only been seen in replicas from top manufacturers such as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal manoeuvrability of the replica and the weight is hardly noticeable once you have shouldered the replica.

The replica has a New generation quick-release system, the so-called SAEC™. Thanks to this system, it is possible to quickly and easily adjust the performance of the replica to the expected conditions on the pitch without having to have access to a workshop or a set of special tools. The spring change is even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be removed from the replica- it is enough to remove the shaft slider (no tools are needed - it is fixed with a tightened ring and a latch), then it is necessary to unscrew the pin located under it together with a spring slider on bearings. We replace the main spring, screw the pin back into the body, fasten the shaft and... we are back in the game! The whole process only takes a moment and, to repeat, does not require any tools.

The advantages of the SAEC™ system can hardly be overestimated. Given the current tendency throughout Europe to use legal restrictions on the muzzle velocity of replicas or internal regulations within different groups, the system guarantees the user a wide range of possibilities and a great deal of freedom. The SAEC™ system allows, the main spring with a minimum of time and thus adapt the muzzle velocity to the playing field in such a way that an ideal compromise between shooting effect and safety for the user himself and for other participants is guaranteed.

The replica is fully compatible with LiPo and LiFe Batteries. Due to the basic muzzle velocity of ~430 FPSwhich is achieved by the main spring fitted as standard by the manufacturer, the replica is perfectly suited for use at medium distances. The set also contains a M90 spring, which makes it possible to reduce the muzzle velocity to ~310 FPS and thus adapt the replica for use at short range and indoors.

A reinforced gearbox at cylinder level contains a steel spring carriage, which is an element of the SAEC™ system and is mounted on 8 mm steel ball bearings and washers. The system is secured with four anti-reverse locks. A lightweight polycarbonate piston is fitted with steel teeth to increase its durability. A type 2 cylinder and steel circuit breaker have also been fitted, as well as a metal hop-up chamber.

The upgraded version offers a range of new, reinforced parts such as:

- Reinforced steel gears
- Bearing-mounted steel spring slider
- Lightweight polymer piston with steel band
- Aluminium-reinforced piston head
- Metal cylinder head
- Reinforced metal nozzle

The replica is equipped with a 22 mm RIS rail, a free float handguard and an adjustable stock. The upper RIS rail has a folding metal sight that can be freely removed to create space for attaching an optoelectronic aiming device of your choice. The extendable stock with non-slip butt pad makes it possible to adjust the length of the replica to the user's body type and preferences. The standard flash hider is based on a 14 mm left-hand threadwhich allows a silencer to be fitted in its place.

To increase the realism of the game, the replica also features a functional bolt-catch mechanism.

The replica is supplied with a 300 BB Hi-Cap steel magazine.

Specna Arms Replica are compatible with many magazines available on the market, from manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

SAEC™ system is included in the European patent with a number: 002639500

Additional accessories shown in the preview pictures are not part of the set!

The set does not contain a battery or charger.

The set contains:

– Replica
– Magazine
- Fixed iron sights
- additional mainspring

ATTENTION:

According to the report number HKGEC1600157401, the product fulfils the requirements of the EU RoHS - Restriction of Hazardous Substances 2011/65/EU Directive Annex II and the 2002/95/EC amending directive concerning the restriction of hazardous substances in electronics.

This means that Specna Weapons Free from harmful materials like:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
– polybrominated Biphenyl (PBB)
– polybrominated Diphenyl ether (PBDE)