SA-V04 ONE™ KeyMod 9 SAEC™ System Carabiner Replica - Half-Tan"

SA-V04 KeyMod 9″ SAEC™ System Assault Rifle Replica

SA-V04 Assault rifle replica from Specna Arms is largely made of a uniform zinc and aluminium Aluminium-Alloy, reinforced with steel elements in the most sensitive areas of the replica (steel elements - all screws, pins and tactical sling swivels). Both the SF stock, which holds the battery, and the pistol grip are made of polymer. The receiver of the replica was the anodising process which guarantees a high level of protection against corrosion. The colour was Powder coating process after the surface had been sandblasted before the colour was applied. This ensures a much higher abrasion resistance of the applied colour than usual. The receiver carries USMC markings.

The Parts of the replica fit together very well - In addition, the replica is perfectly balanced in a way that was previously only seen in replicas from top manufacturers such as G&P or Classic Army. This allows for almost ideal manoeuvrability of the replica and the weight is hardly noticeable once you have shouldered the replica.

The replica has a New generation quick-release system, the so-called SAEC™. Thanks to this system, it is possible to quickly and easily adjust the performance of the replica to the expected conditions on the pitch without having to have access to a workshop or a set of special tools. The spring change is even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be removed from the replica- it is enough to remove the shaft slider (no tools are required - it is fixed with a tightened ring and a latch), then you need to unscrew the pin underneath together with a spring slider on bearings. We replace the main spring, screw the pin back into the body, attach the shaft and... we are back in the game! The whole process only takes a moment and, to repeat, does not require any tools.

The advantages of the SAEC™ system can hardly be overestimated. Given the current tendency throughout Europe to use legal restrictions on the muzzle velocity of replicas or internal regulations within different groups, the system guarantees the user a wide range of possibilities and a great deal of freedom. The SAEC™ system allows, the main spring with a minimum of time and thus adapt the muzzle velocity to the playing field in such a way that an ideal compromise between shooting effect and safety for the user himself and for other participants is guaranteed.

The replica is fully compatible with LiPo and LiFe Batteries. Due to the basic muzzle velocity of ~430 FPSwhich is achieved by the main spring fitted as standard by the manufacturer, the replica is perfectly suited for use at medium distances. The set also contains a M90 spring, which makes it possible to reduce the muzzle velocity to ~310 FPS and thus adapt the replica for use at short range and indoors.

A reinforced gearbox at cylinder level contains a steel spring carriage, which is an element of the SAEC™ system and is mounted on 8 mm steel ball bearings and washers. The system is secured with four anti-reverse locks. A lightweight polycarbonate piston is fitted with steel teeth to increase its durability. A type 2 cylinder and steel circuit breaker have also been fitted, as well as a metal hop-up chamber.

The upgraded version offers a range of new, reinforced parts such as:

- Reinforced steel gears
- Bearing-mounted steel spring slider
- Lightweight polymer piston with steel band
- Aluminium-reinforced piston head
- Metal cylinder head
- Reinforced metal nozzle

The replica is equipped with a 22 mm RIS rail and an adjustable stock. The upper RIS rail is equipped with a folding metal sight that can be removed to make room for an optoelectronic aiming device of your choice. The extendable stock with non-slip stock pad makes it possible to adjust the length of the replica to the user's body type and preferences. The standard flash hider is based on a 14 mm left-hand thread, which allows a silencer to be fitted in its place.

This model has a modular KeyMod Stem 9″ long. Dedicated Segments, such as RIS rails (KeyMod-nuts) can be attached to the KeyMod Front wall in any position and configuration through holes around the handle (KeyMod-slots).

This is an airsoft version of the KeyMod Handles, the size may differ from the original. We do not guarantee full compatibility of KeyMod Handles with KeyMod Accessories.

To increase the realism of the game, the replica also has a functioning bolt catch mechanism.

The replica comes with a 300 BB Hi-Cap magazine made of steel. Its Colour sample is suitable for magazines intended for live firearms typically used by armed forces.

Specna Arms Replica are compatible with many magazines available on the market, from manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

SAEC™ system is included in the European patent with a number: 002639500

Additional accessories shown in the preview pictures are not part of the set!

The set does not include the battery or charger.

The set contains:

– Replica
– Magazine
- Fixed iron sights
- additional mainspring

ATTENTION:

According to the report number HKGEC1600157401, the product fulfils the requirements of the EU RoHS - Restriction of Hazardous Substances 2011/65/EU Directive Annex II and the 2002/95/EC amending directive concerning the restriction of hazardous substances in electronics.

This means that Specna Weapons Free from harmful materials like:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
– polybrominated Biphenyl (PBB)
– polybrominated Diphenyl ether (PBDE)