SA-V13 ONE™ carbine replica (ASCU2 Gen.4 + version)

Description

SA-V13 carbine replica

The SA-V13 carbine replica from Specna Arms is made of zinc and aluminium alloy, with the use of steel elements in the most vulnerable points of the replica (steel elements - all screws, pins and tactical sling swivels) The SF stock, which houses the battery, and the pistol grip are made of polymer plastic. The housing and the RIS rail are anodised, which guarantees a high level of protection against corrosion. The replica itself was painted by Pulverising after the surface has been sandblasted. This ensures a much higher abrasion resistance of the applied paint than usual. There are USMC markings on the bodywork.

The replica is very well fitted - as can almost only be seen with G&P or Classic Army manufacturers - and perfectly balanced. This ensures perfect manoeuvrability of the replica, and its weight is almost imperceptible once the replica is placed on the shoulder.

The replica uses a fast spring change system, the so-called Enter & Convert ™. This allows for quick and efficient adjustment of the replica's performance to the expected field conditions without the need to have access to a workshop or a set of specialised tools - after removing the gearbox from the body of the replica, the process of replacing the spring itself literally takes a few seconds.

The advantages of the Enter & Convert™ system cannot be overestimated. Given the prevailing tendency throughout Europe to apply legal limits to the muzzle velocity of the replica and the regulations existing in the environments themselves, this system offers the user considerable possibilities and a great deal of freedom. The ESA ™ system allows you to quickly, with little to no effort to change the main spring and thus adapt the muzzle velocity of the replica to the requirements of the match organiser. This guarantees an ideal compromise between the effectiveness of the shot and your own safety as well as the safety of your fellow players.

The replica has been fully adapted for operation with LiPo and LiFe batteries. Thanks to the basic muzzle velocity of ~ 430 FPS which is guaranteed by the factory-installed main spring, the replica is perfect for use in the medium range. The set also contains one M90 springwhich allows you to reduce the initial muzzle velocity to ~ 310 FPS, making the replica perfect for operating at close range or inside buildings.

The gearbox, which is reinforced at the level of the cylinder head, houses a steel spring guide, which is an element of the Enter & Convert ™ system, and steel gears mounted on 8 mm ball bearings. The system is secured by four anti-reverse latches.

The replica is equipped with a 22 mm RIS rail, a set of front Free Float rails and an adjustable stock. A folding metal sight is mounted on the upper RIS rail, but this can easily be replaced by an optoelectronic sight. Thanks to the retractable stock with non-slip texture, it is possible to adjust the length of the replica to the shooter's body type and preferences. The standard flash hider is mounted on a 14 mm left-hand thread which allows a silencer to be fitted in its place.

To increase the realism, the replica was also equipped with a functioning bolt release equipped.

The set with the replica also includes a steel high-cap magazine with a capacity of 300 BBs.

Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as: - BOYI, - Airsoft Systems, - SRC, - King Arms, - MAG, - STAR, - ACM.

The replica has the ASCU2 Gen.4+ system installed in our service centre

In the latest version of the ASCU2 Gen. 4+, we have improved software that protects the system from damage caused by the use of damaged or inferior batteries.

ASCU is a two-part electronic module (control unit and sensor unit) which, when installed in airsoft replicas, is used to control the airsoft system, significantly improved their operations. The traditional contact system has been replaced by a sensor unit that monitors the current position of the piston rod, the fire selector and the trigger. The information it collects is transmitted to the control unit, where the software analyses it and controls the motor of the replica via an active MOSFET brake.

The Gen.4 version is first and foremost:

1. New transistors that have 16 times less resistance than previous versions, resulting in even faster trigger response, better active brake performance and less heat generation

2. new, very strong trigger microswitch

3. new, reinforced structure of the entire system with a polymer housing

4. increased short-circuit protection

5. much simpler installation

6. updated software to simplify programming

7. improved dedicated breaker lever

8. Improved dedicated dial disc

ASCU improves the work of the v.2 gearbox and makes the replica equal to the most expensive and complicated replicas of the PTW class.

The ASCU system monitors the operation of the replica regardless of the speed at which the trigger is pulled and is responsible for the complete execution of the working cycle of the piston, both in semi-automatic and continuous fire mode. After each shot, the piston stops in the starting position.

ASCU has a Low Drain Protection System specially developed to protect lithium-polymer (LiPo) batteries from damage.

In the event of problems, the ASCU interrupts the ignition in the replica and thus protects the internal components from further damage.

Please note!

It is recommended to use a battery with a voltage of 11.1 or 12V. 7.4 and 8.4V batteries can only be used in configurations with the M90-M100 main spring. The manufacturer recommends the use of a high-quality motor with ASCU2 gen.4 +. The manufacturer recommends using a high-quality rechargeable battery with ASCU2 gen.4 +. The price of the replica does not include the optional accessories shown in some of the photos. The set is listed below.

The set includes: - Replica - magazine - mechanical sights - additional main spring