Leviathan EVO3

Description

Leviathan - EVO3 is a processor-controlled Mosfet with wireless communication.
It adds new shooting modes, controls RoF, biasing, active braking, low battery indicator, statistics ...
Everything is controlled via an application in the smartphone (iOS and Android).
The unit is fully integrated into the gearbox version ASG EVO 3 A1 instead of the original electronics.
It retains all the functions of the original electronics - magazine empty detection, bolt catch, burst fire, battery undervoltage protection,...
Comes with fully assembled wires on the front with DeanT connector - no soldering required.

MAIN FUNCTIONS:
- Adds new shooting modes, independently for each position on the fire selector (SEMI - BURST - AUTO).
- Three adjustable shots (range 2 - 20 shots)
- The rate of fire can be reduced to 40 %. Pauses are added between shots to reduce RoF. It allows a fast trigger response even at very low rate of fire, just like with a real gun
- Included is an ARL mode that activates the reverse lock, allowing the use of preload, lower level active braking and DSG gears
- Active braking with adjustable strength (can be deactivated if ARL mode is installed)
- Bias function for instant firing on SEMI fire (can only be used with ARL mode installed).
- The bolt catch lever must be pulled after connecting the battery, simulating how the bullet is loaded into the barrel on a real gun
- The acoustic indication of the empty magazine and the bolt catch lever can be deactivated in the app
- The delay between shots increases the time during which firing is not possible. It simulates the delay in reloading or recoil of the weapon (range 0.1 to 4.0 seconds).
- Sensitivity of the electronic fuse set to detect high currents to prevent damage if something goes wrong
- Low battery indicator for 2S - 4S Li-Pol and 3S - 4S Li-Fe
- The statistics screen shows firing performance with cycle time, motor power consumption, firing rate and mosfet temperature. It allows you to fine-tune the gear upgrade
- The application displays the actual battery voltage value. Colour lines show the battery's state of charge
- The user can save several settings under profiles
- The update function fixes bugs and adds new functions to the device
- There are three shot counters. Total number of all shots during the life of the unit. The user counter can be reset by the user at any time. The power-on counter is reset by battery connection
- The error log shows errors that have occurred during the life of the unit
- For better security, the wireless connection can be deactivated via selector switch (can be deactivated)
- Leviathan - EVO 3 monitors current, voltage and temperature to prevent damage if something goes wrong.
- The motor vibrates and beeps as feedback for the user
- Programmed settings are stored in the Leviathan - EVO 3's memory as soon as they are changed, so settings are not lost if the battery is disconnected or the smartphone is disconnected.

FIRE MODIES:
Independent for each position on the fire selector switch (SEMI - BURST - AUTO)
- SAFE: No reaction to the trigger.
- Semi: A single shot is fired per trigger pull.
- Semi/BurstX: Short trigger pull fires a single shot, long trigger pull fires a burst of shots.
- Binary trigger: Fires a single shot when the trigger is pulled and another single shot when the trigger is released.
- BurstX: Shot burst per trigger pull.
- BurstX+BurstY: A short press of the shutter release button triggers BurstX, a long press of the shutter release button triggers BurstX+BurstY.
- BurstX/Full: A short press of the trigger releases BurstX, a long press of the trigger fires automatically.
- Full: The weapon fires automatically until the trigger is released.

TECHNICAL SPECIFICATIONS:
- Easy installation in the gearbox version ASG EVO 3 A1
- No modifications to the weapon or Leviathan - EVO3 are required
- Compatible with Scorpion EVO 3 - A1, Scorpion EVO 3 - A1 B.E.T., Scorpion EVO 3 - A1 Carabiner with Gear Gen.1, Version 2018 and Version 2020.
- Compatible with stock and CNC trigger
- Installation ARL mode: With the backstop you can use preload, active brake at lower level and DSG gears
- It uses a microswitch actuated by a sector gear to ensure perfect timing for half and bump fires
- Thanks to advanced electronics, Leviathan - EVO 3 can be used with any common gear upgrade and gun fire rate
- The fully fabricated wiring allows the quickest and easiest installation in the weapon. It is long enough for all types of weapons with a front-placed battery. No soldering is required
- These are high-quality wires 1.5 qmm (AWG16) with thin and hard MPPE insulation
- The outer diameter of the wire is only 2.06 mm
- The circuit board has a protective coating that protects Leviathan - EVO3 from water
- Specified for common batteries up to 17 V (Ni-xx 8.4 - 12 V, Lipol 7.4 - 14.8 V)
- The device increases the rate of fire of the weapon and the battery lasts longer than with simple wiring
- When braking actively, the piston is not partially stretched, the spring is fully released, parts in the mechabox are not under tension and the nozzle locks the hop-up chamber for the most part (depending on the ROF).
- For weapons with very high rate of fire (ROF), the active brake triggers several shots in half mode
- The braking effect is strongest with a high-torque motor
- Remove from the gearbox: Shift lever, standard electronics, on the Leviathan - EVO 3 you are not needed.

USE WITH BRUSHLESS MOTOR:
- Leviathan can be used with brushless motor (Warhead, option no. 1 etc.)
- Activate the "Brushless Motor" function in the Leviathan app and use all available options worry-free.

LEFT:
Mobile application Leviathan by JeffTron for iOS and Android smartphones
Installation Guide for Leviathan - EVO3 [PDF, 5.76 MB]
Leviathan by Jefftron Q&A Discussion Forum on Facebook

PACKAGING:
- Leviathan - EVO3 drop-in electronics module with wiring to the front, DeanT connection
- ARL mode: backstop, spring and special screw
- Two screws with plastic washers under the screw to fix the device in the gearbox
- Black Leviathan Sticker 40 mm
- Foam to hold the unit in place
- Installation instructions in English

SAFETY WARNING:
- The installation of this unit in the gearbox requires advanced expertise!
- Please read this information before installing your unit to avoid damage.
- A short circuit or incorrectly connected battery will cause immediate damage to the unit that is not covered by the warranty. A fire or even battery explosion may occur.
- Disconnect the battery when you are not using the gun! Otherwise the battery will be completely discharged. Because the device constantly draws a small amount of current from the battery.
- Do not connect the battery when the gun is pointed at you, another person or an animal.
- Do not modify, repair or expose the Leviathan - EVO3 to liquid or thermal shock.