SA-H08 ONE™ TITAN™ V2 Custom carabiner replica - black

Description

SA-H08 ONE™ TITAN™ V2 Custom carabiner replica

Limited version of the replica with TITAN™ V2 Advanced chip from the GATE brand installed!

The TITAN™ V2 Drop-In mosfet controller kit transforms your AEG into an advanced training replica. It gives you a tactical advantage with lightning-fast trigger response and the ability to modify the replica and customise it for any mission with 20 available functions. This is GATE's most advanced and highest quality model.

The TITAN™ V2 controller breathes a whole new life into the ASG electric replica.

TITAN™ gives you new possibilities:

- Setting the trigger sensitivity
- Pre-cocking increase, (shortens the time from pressing the trigger to firing)
- Setting the fire selection modes
- Serial fire mode
- Setting the firing rate
- Setting the firing rate
- Low battery warning
-. Protects the battery from damage
- "Sniper delay"
- Full cycle detection
- AUG mode - two trigger sensitivities can be set (single and continuous fire)

Complete layout description: https://gunfire.com/pl/products/zestaw-kontrolera-titan-tm-v2-advanced-set-rear-wired-1152218717.html

The Specna Arms SA-H08 carbine replica is predominantly made of a uniform zinc-aluminium alloy, with steel elements being used at the most critical points of the replica (all screws, pins and the tactical suspension are made of steel). The buttstock and pistol grip are made of polymer plastic. The body of the replica and the RIS rail mount are made of a Anodising process which guarantees a high level of corrosion protection for the replica. The replica itself was painted in the Powder processafter the surface has been sandblasted. As a result, the applied colour is much more abrasion-resistant than usual. The barrel is labelled with the manufacturer's markings.

The stock is very well fitted and perfectly balanced - as is almost exclusively known from manufacturers of the G&P or Classic Army class. This ensures almost ideal manoeuvrability of the replica, and the weight is hardly noticeable when the replica rests against the shoulder.

The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's performance to the expected field conditions without the need for access to a workshop or a range of specialised tools - after removing the gearbox from the replica's body, the actual spring change takes literally seconds.

The advantages of the Enter & Convert™ system can hardly be overestimated. In view of the prevailing tendency in Europe towards legal restrictions on the firing speed of replicas and the regulations that exist in the environments themselves, this system guarantees the user considerable possibilities and a high degree of freedom. The Enter & Convert™ system allows with a minimum of time the driving force and thus adapt the exit speed of the replica to the playing area in order to guarantee an ideal compromise between the effectiveness of fire control and the safety of oneself and other players.

The replica has been fully adapted for operation with LiPo and LiFe batteries. With an initial discharge speed of ~430 FPS which is guaranteed by the factory-installed main spring, the replica is perfectly suited for use at medium distances. A M90 type spring is also included, which allows the initial speed to be reduced to ~310 FPS, making the replica perfect for short distance or indoor use.

The gearbox, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the Enter & Convert™ Systems is that with 8mm ball bearings and pads Steel gears is equipped. The system is secured against reversing by four locking pawls. The lightweight plastic piston made of polycarbonate is fitted with a steel tooth to increase its strength. In addition, a Cylinder type 2 and a Steel breaker and a Metal hop-up chamber installed.
The rifle is equipped with a 22 mm RIS back rail, a set of front RIS rails and an adjustable buttstock. A folding metal sight is mounted on the upper RIS rail, but this can be replaced by an optoelectronic sight if required. Thanks to the adjustable buttstock, which is fitted with a non-slip, textured base plate, the length of the replica can be adapted to the shooter's build and preferences. The standard flame extinguisher is mounted on a 14 mm left-hand thread so that a silencer can also be fitted in its place.
To increase the realism of the game, the replica was also equipped with a acting shutter release equipped.

The 06 version has a folding SF stock on a slide to which the battery is also connected. The front of the replica is equipped with a RIS rail with the M-Lock system, which makes it possible to adjust the position of the RIS rails according to user preference. The front of the replica is also equipped with 2 places for a QD suspension clip. The whole thing is topped off with a QD silencer that is screwed onto the 14CCW thread.

The replica also comes with a steel hi-cap magazine that holds 300 rounds.

The kit does not contain a battery or charger.

The kit contains: