Specna Arms SA-B11 ONE™ SAEC™ System carbine replica

Description

The Specna Arms SA-B11 URX SAEC™ system

The Specna Arms SA-B11 carbine replica is predominantly made of a uniform zinc-aluminium alloy, with steel elements being used in the most critical areas of the replica (all screws, pins and the tactical suspension are made of steel). Both the SF stock and the pistol grip, which holds the battery, are made of polymer plastic. The body of the replica and the RIS rail mount were made from a Anodising process which guarantees a high level of corrosion protection for the replica. The paintwork on the replica itself was Powder process after the surface has been sandblasted. This ensures that the applied colour is much more abrasion-resistant than usual. The USMC markings were applied to the barrel.

The rifle is very well fitted and perfectly balanced - as is almost exclusively the case with G&P or Classic Army manufacturers. This ensures almost ideal manoeuvrability of the replica and the weight is hardly noticeable when the replica rests against the shoulder.

The replica uses a New generation quick-change spring system, the so-called SAEC™. This enables quickly and efficiently adjust the performance of the replica to the expected conditions on the pitch without the need for access to a workshop or a range of specialised tools. Changing the spring is now even faster than with the previous version of the system.

Thanks to the SAEC™ system the gearbox no longer needs to be pulled out of the replica -It is sufficient to remove the piston guide (without the use of tools - it is secured by means of a screw ring and a latch) and then unscrew the special pin underneath together with the spring guide bearing. The recoil spring is replaced, the bolt is screwed back into the barrel, the piston is fitted and ... back into action! The whole process literally only takes a moment, and as I said: No tools are required.

The advantages of the SAEC™ Systems can hardly be overestimated. In view of the prevailing tendency throughout Europe to legally limit the discharge rate of replicas and the regulations within the municipalities themselves, this system guarantees the user considerable possibilities and a great deal of freedom. The SAEC™ system enables the mainspring to be adjusted with a minimum of time. and thus adapt the discharge speed of the replica to the playing field in order to ensure an ideal compromise between the effectiveness of the firepower and the safety of oneself and other players.

The replica has been fully adapted to work with LiPo and LiFe batteries. With an initial discharge speed of ~430 FPS which is guaranteed by the factory-installed main spring, the replica is perfectly suited for use at medium distances. A M90 type spring is also included, which allows the initial speed to be reduced to ~310 FPS, making the replica perfect for short distance or indoor use.

The transmission, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the SAEC™ Systems is and on 8mm ball bearings and pads Steel gears is mounted. The system is secured against reversing by four pawls. The lightweight plastic piston made of polycarbonate is equipped with a row of steel teeth to increase its strength. It also uses a Cylinder type 2 and Steel breakerand a Metal hop-up chamber.