TR16 R4 Commando assault rifle replica

Description

Replica TR16 R4 Commando carbine

Replica carabiner the TR16 R4 series from G&G was produced as part of the Top Tech line. Metal and plastic were used in its manufacture.
The fire selector switch is located on the left-hand side of the housing and is labelled with graphic descriptions of the fire mode. The replica is equipped with the PBB system, which perfectly imitates the effect of a flammable counterpart. It sets the dummy breech block in motion and causes a noticeable "kick" of the replica in the shooter's arm
When the reloading handle is pulled back, the cartridge ejection port cover opens and the dummy bolt moves back to the rear position. This is how the hop-up can be adjusted. Interestingly, the breech block also plays an important role: when it is depressed, the recoil latch in the gearbox disengages, releasing the recoil spring. This considerably extends the service life of the replica, as the effects of spring wear are minimised.

The battery is housed inside the SF piston. Thanks to the considerable space available inside the piston, it is possible to use an energy source of considerable size and therefore of considerable capacity. The replica has adjustable mechanical sighting devices, the sighting module is mounted on the dorsal RIS rail and can therefore be removed. Rails are also used in place of the front handle, allowing the attachment of all kinds of additional accessories such as optics, tactical lighting, laser aiming indicators, grips, etc. A vertical tactical grip is included in the scope of delivery.

The rifle is finished in black. It is ideal for use at medium range due to the M120 spring used, which enables a trigger speed of ~390 FPS. In the centre is a sealed pneumatic system equipped with a high-end chamber and HU rubber band.
The carabiner usesthe phenomenal BlowBacksystem that adds realism to the use of the replica and provides the user with an additional experience.Pneumatic Blow Back works by releasing some of the compressed air from the gearbox into a special cylinder located above the frame. The piston in the PBB cylinder moves a thin plate attached to it, which imitates a lock.

WARNING: The manufacturer advises against using batteries with a voltage higher than 8.4 V, as the plate in question could be damaged.

G&G replicas with the PBB system have a Reinforced, modified V2 gearbox. Modifications include the adaptation to the PBB system and the addition of an "active spring release" in the form of a locking button.

The gearbox is equipped with 8 mm ball bearings, a brass cylinder head and an aluminium piston head.

The kit does not include a battery or charger.

The kit contains:

- Replica carabiner
- Magazine
- Vertical tactical handle on RIS rail

.