ELMS assault rifle replica (Gen.2)

Description

Replica ELMS carbine (Gen.2)

E&L Airsoft is a new quality on the airsoft replica market. This manufacturer has set itself the task of creating replicas that are as close as possible to their firearm counterparts in terms of material quality and accuracy of fit, and has gone as far as possible in doing so - with production in the same factory where firearms are manufactured! The exact same materials were used for the replicas as for the originals: Steel, hand-crafted wooden parts or high-quality composite material. Some exterior parts are also Identical to the firing original and come from the same assembly line.

This has put E&L definitively at the forefront of replica manufacturers beyond the eastern border. It can compete (and win!) with the best brands on the market - also in terms of price. Its quality and parameters allow it to be both a beautiful wall decoration and a very effective replica in use.

In addition, the maximum number of parts possible in a replica is produced on a 1:1 scale with the original, in accordance with military specifications. This means that components can be exchanged between the replica and the firing counterpart! This applies, among other things, to the front bed and the gas tube cap, the sighting instruments. Only a few other manufacturers offer such options.

The wooden parts are finished by hand, which guarantees both high quality and uniqueness. In this model, the bed and the gas pipe cover are made of wood. The uniqueness is also achieved by the individual serial number on the casing. The steel parts, on the other hand, are oxidised, which makes their appearance even more realistic, In addition, the wear and tear of oxidation over time creates a much better visual effect than painted replicas.

Everything has also been done for realism in terms of weight. The replica is heavy, and balance is also ensured by the all-steel outer barrel. One remarkable element is certainly the Possibility of partial disassembly of the replica, like a fireable counterpart - without the use of tools. Everything is based on pins and levers. The manufacturer has taken care of the smallest details to bring its products as close as possible to the original.

All E&L replicas are coated with a thick technical oil that protects the product from moisture and other possible contaminants during transport. The mixture of oil, steel and varnished wood results in a unique odour that is well known to those who handle firearms.

The battery of the replica is located under the lock chamber cover. The cover is attached with a single push button so that it can be removed in a flash at any time and the energy source replaced.

The product is also perfect on the inside. E&L's engineers have collected the best solutions on the market and added their own. The pneumatic system consists of a set of quiet piston heads and cylinders, which increases the service life of the system through better damping. The spring guide is mounted on bearings and there is a larger retarder on the piston pinion. This gives the bullet more time to enter the chamber, which is particularly important in high velocity configurations. High precision and firing accuracy are ensured by a Precision inner barrel with 6.04 mm diameter.

What are the features of Generation 2?

Generation 2 was equipped with a complete new gearbox standard! Firstly, it has the Quick Spring Release system. This system enables the performance of the replica to be quickly to the user's needs by replacing the main spring without having to open the gearbox and thus have access to a workshop or special tools. Once the gearbox has been removed from the replica housing, replacing the spring takes no time at all thanks to the special designs of the frame and the Guidance literally only a few seconds.

Generation 2 is characterised by a Improved, even more robust gearbox The skeleton, gearbox, cylinder, nozzle, spring guide and cabling have been replaced compared to the previous models. The new solutions guarantee a higher operating culture, a higher ROF and lower power consumption.

What exactly are the components inside the E&L Gen.2?

- a new type of reinforced transmission skeleton based on 9mm ball bearingsadapted to the Quick Spring Release System
– Warehouse Lead management QSR (Quick Spring Release)
- one sentence Steel gears, manufactured with CNC
– one-piece, Steel-cylinder manufactured on CNC
- Nozzle sealed with additional O-ring
- Set 9mm
- Ball bearing. reinforced POM piston with three Steel-teeth
– more silenced Piston head
- more efficient High Torque M170 motor on Neodymium magnets
– low resistance, silver-plated Cabling

Generation 2 also comes with an interesting addition - a Magwell Spacer for the magazine shaft, the installation of which Magazine change really simplified and accelerated!

The replicas will be brand newThe replicas are supplied in practical and elegant boxes. The boxes have a hard sponge filling that keeps the replica and all accessories safe and stable. Each replica comes with an oiler, while the full barrel models also include a cleaning tool box designed just like the ones for firearms.

The replica is supplied with a mid-cap steel magazine with a capacity of 150 rounds.

In the box you will find:

- Replica
- Magazine
- Oiler
- Magwell Spacer

Example LiPo battery models that fit under the lock chamber cover:
http://gunfire.pl/product-pol-1152198888-Akumulator-LiPo-7-4V-1300mAh-25C.html
http://gunfire.pl/product-pol-1152206129-Akumulator-LiPo-7-4V-1300mAh-25-50C-.html
http://gunfire.pl/product-pol-1152198565-Akumulator-Redox-LiPo-1400-mAh-7-4V-20C.html (requires T-connect/Tamiya small adapter)

Magazine compatibility: Most magazine types from LCT and MAG fit seamlessly into the replica, minor modifications may be required for some types of CM, Boyi, JG magazines.

Note: The kit does not contain a battery or charger.

.