Complete reinforced gearbox V2 QD (wired at the front)

Complete reinforced gearbox V2 QD (Front-Wired) 

A reinforced V2 gearbox from Specna Arms. The product is intended for installation
in M4 / M16 replicas. The frame has been adapted for the use of 8 mm plain bearings.
The manufacturer has taken care to reinforce the most vulnerable parts of the structure.
construction, which allows the use of stronger springs. The Gearbox V2 is
an excellent solution for anyone looking for a high-quality bowl at a reasonable price.
The gearbox has a spring quick-change system that is compatible with the series
CORE and ONE series Replicas from Specna
Arms.

The Enter & Convert quick
Spring exchange system enables Quick and easy Adjusting the performance of the replica
performance to the conditions that can be encountered on the airsoft battlefield. The
Adjustment does not require disassembly of the entire gearbox. The user
doesn't even need to have special tools to hand or spend time in a workshop.
workshop. The first step is to remove the gearbox from the body of the replica.
The user must then push the spring together with the guide through the opening in the
through the opening in the rear wall of the housing. The process itself only takes few
Seconds.

The following
Parts are included inside: reinforced 18:1 steel Gearbox;
an m110 spring; a lightweight polymer piston with a last tooth made of steel; a
Polymer piston head with air seal; one cylinder head with soft damper; one
Cylinder made of aluminium, type 0; one polymer nozzle and one spring guide. The replaced
configuration can generate a muzzle velocity of 400 - 420 FPS, depending on the
Replica. 

In
to improve the response time of the trigger and the service life of the LiPo batteries,
the housing was designed for the use of the supplied microcontact instead of
Standard contact plates.

These
Version is front-wired.