NT Blackbird 45K CNC Motor Long

Description

The Blackbird 45K series is made of solid materials and is suitable for almost any setup. Due to the high speed, it can also be used in short stroke setups with 0.5 joules or under 1 joules. Pay attention to the control of the spring and sector gear to prevent premature locking, which would cause the piston or sector gear to break.

Our magnets withstand high temperatures up to 150°C
The anchor is equipped with a cooling system and 0.8 mm wires.

The cooling port near the end bell provides effective cooling without the risk of damaging the engine if an internal component fails. The CNC-machined end bell also ensures better cooling and a better fit and durability of the bearings in the engine. The pinion is made of robust material with MIM technology and is easy to replace if necessary thanks to the D-shaped fit. It also provides a better power transmission than O-shaped sprockets.

We recommend the use in the following setups
32:1 / 18:1
Springs: M100 to M130

rpm at 11.1 V: 45000
Pinion shape: D-shape