SA-A03 ONE™ SAEC™ System Carabiner Replica - Half-Tan

Description

Replica SA-A03 SAEC™ System Carbine - Half-Tan

The replica of the SA-A03 carbine from Specna Arms is predominantly made of a uniform zinc-aluminium alloy, with steel elements being used in the most critical areas of the replica (all screws, pins and the tactical suspension handle are made of steel). Both the SF stock and the pistol grip, which holds the battery, are made of polymer plastic. The housing of the replica and the RIS rail mount were made from a Anodising process which guarantees a high level of corrosion protection for the replica. The replica itself was painted in the Powder processafter the surface has been sandblasted. This makes the applied paint much more abrasion-resistant than usual.

The Half-Tan version has a pistol grip, hip flask and magazine in tan. The set also contains 2 covers for the RIS railsmade of soft plastic, also in tan colour.

The rifle is very well made and perfectly balanced - as was previously almost only known from manufacturers of the G&P or Classic Army class. This ensures almost ideal manoeuvrability of the replica, while the weight is hardly noticeable as soon as the replica rests on the shoulder.

The replica uses a New generation quick-change spring system, the so-called SAEC™. This allows the performance of the replica to be quickly and efficiently adapted to the expected conditions on the pitch without the need for access to a workshop or a range of specialised tools. Replacing the spring is now even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be pulled out of the replica - It is sufficient to remove the piston guide (without tools - it is fastened with a screw ring and a bolt) and then unscrew the special pin underneath together with the bearing of the spring guide. The recoil spring is replaced, the bolt is screwed back into the barrel, the piston is fitted and ... back into action! The whole process literally only takes a moment, and as I said: No tools required.

The advantages of the SAEC™ system can hardly be overestimated. In view of the prevailing tendency throughout Europe to legally limit the discharge speed and the regulations in the municipalities themselves, this system guarantees the user a high degree of efficiency and freedom. The SAEC™ system allows with a minimum of time, the main springand thus adapt the exit speed of the replica to the playing surface in order to guarantee an ideal compromise between the effectiveness of the weapon and the safety of oneself and other players.

The replica has been fully adapted for operation with LiPo and LiFe batteries. With an initial discharge speed of ~430 FPS which is guaranteed by the factory-installed main spring, the replica is perfectly suited for use at medium distances. A M90 type spring is also included, which allows the initial speed to be reduced to ~310 FPS, making the replica perfect for short distance or indoor use.

The gearbox, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the SAEC™ system and is mounted on 8mm ball bearings and pads Steel gears is mounted. The system is secured against reversing by four pawls. The lightweight plastic piston made of polycarbonate is equipped with a row of steel teeth to increase its strength.

It also has a Type 2Cylinderand Steel breaker. The replica is factory-equipped with a precise, rotating polymer hop-up chamber that provides a Very precise and stable adjustment of the ball under tensioning system made possible.

The improved version has a number of new reinforced parts such as:

- a set of reinforced steel gears
- a steel spring guide with ball bearings
- a lightweight polymer flask with steel lamella
- one sealed aluminium piston head
- a sealed metal cylinder head
- a sealed metal nozzle

The upgraded version has a 22mm dorsal RIS rail, a set of frontal RIS rails and an adjustable buttstock. A folding metal sight is mounted on the upper RIS rail, but this can be replaced by an optoelectronic sighting device as required. Thanks to the adjustable buttstock, which is fitted with a non-slip, textured base plate, the length of the replica can be adapted to the shooter's build and preferences. The standard flame guard is mounted on a 14 mm left-hand thread so that a silencer can also be fitted in its place.

To increase the realism of the game, the replica is also equipped with a acting shutter release equipped.

The replica is also supplied with a steel magazine holding 300 rounds.

The Specna Arms replica is compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

The SAEC™ system is protected by European patent number: 002639500

Additional accessories shown in the preview pictures are not included in the kit!

The kit does not include the battery and charger.

The kit contains:

.