SA-A03 ONE™ SAEC™ system assault rifle replica

SA-A03 SAEC™ System Assault Rifle Replica

SA-A03 assault rifle replica from Specna Arms is mostly made of a uniform zinc and aluminium alloy, reinforced with steel elements in the most sensitive areas of the replica (steel elements - all screws, pins and tactical sling swivels). Both the SF stock, which houses the battery, and the pistol grip are made of polymer. The receiver of the replica and the RIS handguard were the process of anodising, which guarantees a high level of protection against corrosion. The colour was Powder coating process after the surface had been sandblasted before the colour was applied. This ensures a much higher abrasion resistance of the applied colour than usual.

The parts of the replica fit together very well - the replica is also perfectly balanced in a way that was previously only seen in replicas from top manufacturers such as G&P or Classic Army. This allows for almost ideal manoeuvrability of the replica and the weight is hardly noticeable once you have shouldered the replica.

The replica has a New generation quick-release system, the so-called SAEC™. Thanks to this system, it is possible to quickly and easily adjust the performance of the replica to the expected conditions on the pitch without having to have access to a workshop or a set of special tools. The spring change takes place even faster than with the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be removed from the replica- all that is required is to remove the bearing carriage (no tools are required - it is fastened with a tightened ring and a latch), after which it is necessary to unscrew the underlying pin together with a stored spring carriage. We replace the main spring, screw the pin back into the body, attach the shaft and... we're back in the game! The whole process only takes a moment and, let's say it again, does not require any tools.

The advantages of the SAEC™ system cannot be overestimated. Considering the current tendency throughout Europe to use legal restrictions on muzzle velocity of replicas or internal regulations within different groups, the system guarantees the user a wide range of possibilities and a lot of freedom. The SAEC™ system allows the main spring with a minimum of time and thus adapt the muzzle velocity to the playing area in such a way that an ideal compromise between the effectiveness of the fire and the safety of the user and other participants is guaranteed.

The replica is fully compatible with LiPo and LiFe Batteries. Due to the basic muzzle velocity of ~425 FPSThe high level of stability achieved by the main spring fitted as standard by the manufacturer makes the replica perfect for use in the medium range. The set also includes a M90 spring, which makes it possible to reduce the muzzle velocity to ~325 FPS and thus adapt the replica for use at close range and indoors.

A reinforced gearbox at cylinder level contains a steel spring carriage, which is an element of the SAEC™ system and is mounted on 8 mm ball bearings and steel gear washers. The system is secured with four anti-reverse locks. A lightweight polycarbonate piston is fitted with steel gearing to increase its durability. A type 2 cylinder and a steel interrupter have also been fitted. The Replica is factory-fitted with a precise, rotating polymer hop-up unit, which enables very precise and stable regulation of the BB overclocking.

The updated version offers a range of new, reinforced parts such as:

- Set of reinforced steel gears
- Steel spring slider with bearings
- Lightweight polymer piston with steel band
- Aluminium piston head
- Metal cylinder head
- Metal nozzle

The replica is equipped with a 22 mm RIS rail, a RIS handguard and an adjustable stock. The upper RIS rail is fitted with a folding metal sight that can be removed to make room for an optoelectronic aiming device of your choice. The extendable stock with non-slip stock pad makes it possible to adjust the length of the replica to the user's body type and preferences. A standard flash hider is based on a 14 mm left-hand threadwhich allows a silencer to be fitted in its place.

To increase the realism of the game, the replica also features a functioning bolt catch mechanism.

The replica is supplied with a 300 BB Hi-Cap steel magazine.

SpecnaGun replicas are compatible with many magazines available on the market, from manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

SAEC™ system is included in the European patent with a number: 002639500

Additional accessories shown in the preview pictures are not included in the set!

The set contains neither a battery nor a charger.

The set contains:

- Replica
- Magazine
- Iron sights
- additional mainspring