SA-B02 ONE™ SAEC™ system carabiner replica

Description

Replica SA-B02 Carbine SAEC™ System

The replica of the SA-B02 carbine from Specna Arms is predominantly made of a uniform zinc-aluminium alloy, with steel elements being used in the most critical areas of the replica (all screws, pins and the tactical suspension handle are made of steel). Both the SF stock and the pistol grip, which holds the battery, are made of polymer plastic. The housing of the replica and the RIS rail mount were made from a Anodising process which guarantees a high level of corrosion protection for the replica. The replica itself was painted in the Powder processafter the surface has been sandblasted. This makes the applied colour much more abrasion-resistant than usual. The USMC markings were applied to the barrel.

The rifle is very well fitted and perfectly balanced - something that is almost only known from manufacturers of the G&P or Classic Army class. This ensures almost ideal manoeuvrability of the replica, while the weight is also barely noticeable as soon as the replica rests against the shoulder.

The replica uses a New generation quick-change spring system, the so-called SAEC™. This enablesthe quick and efficient adjustment of the replica's performance to the expected conditions on the pitch, without the need for access to a workshop or a range of specialised tools. Replacing the spring is now even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be pulled out of the replica - It is sufficient to remove the piston guide (without tools - it is fastened with a screw ring and a bolt) and then unscrew the special pin underneath together with the bearing of the spring guide. The recoil spring is replaced, the bolt is screwed back into the barrel, the piston is fitted and ... back into action! The whole process literally only takes a moment, and as I said: No tools required.

The advantages of the SAEC™-Systemscan hardly be overestimated. In view of the prevailing tendency throughout Europe to limit the speed at which vehicles can be dropped by law and the regulations in the municipalities themselves, this system guarantees the user a high degree of efficiency and freedom. The SAEC™ system allows with a minimum of time, the main springand thus adapt the discharge speed of the replica to the playing area in order to guarantee an ideal compromise between the effectiveness of fire control and the safety of oneself and other players.

The replica has been fully adapted to work with LiPo and LiFe batteries. With an initial discharge speed of ~425 FPS which is guaranteed by the factory-installed main spring, the replica is perfectly suited for use at medium distances. A M90 type spring is also included, which allows the initial speed to be reduced to ~325 FPS, making the replica perfect for short distance or indoor use.

The transmission, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the SAEC™ Systems is and on 8mm ball bearings and pads Steel gears is mounted. The system is secured against reversing by four pawls. The lightweight plastic piston made of polycarbonate is equipped with a Steel toothing to increase its strength. It also uses a Type 2Cylinder and a Steel breaker. The replica is factory-fitted with a precise rotating, polymeric hop-up chamberequipped with a Very precise and stable adjustment of the bullet cocking systempermitted.

The upgraded version has a number of new, reinforced parts such as:

- a set of reinforced steel gear wheels
- a steel spring guide with ball bearings
- a lightweight polymer plunger with steel shaft
- a sealed aluminium piston head
- a metal cylinder head
- a sealed metal nozzle

The rifle was equipped with a 22 mm back RIS rail, a freely movable front RIS rail and an adjustable buttstock. A folding metal sight was mounted on the upper RIS rail, but this can be replaced by any optoelectronic sighting device. Thanks to the adjustable buttstock, which is fitted with a non-slip, textured base plate, the length of the replica can be adjusted to suit the shooter's build and preferences. The standard flame extinguisher is mounted on a 14 millimetre left-hand thread so that a silencer can also be fitted in its place.

To increase the realism of the game, the replica is also equipped with a acting shutter release equipped.

The replica also comes with a steel high-cap magazine that holds 300 rounds.

The Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.

The SAEC™ system is protected by European patent number: 002639500

The accessories shown in the pictures are not included!

Set does not include battery or charger.

Set includes:

- Replica
- Magazine
- Mechanical sights
- Extra tension spring

INFORMATION

According to the report number HKGEC1600157401

The product complies with the requirements of the EU Directive RoHS - Restriction of Hazardous Substances, Directive 2011/65/EU Annex II; revised version of Directive 2002/95/EC
which deals with the restriction of hazardous substances in electronics.

This means that Specna Arms replicas Free from harmful materials are, for example:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
- polybrominated biphenyl (PBB)
- polybrominated diphenyl ether (PBDE)