SA-B12 ONE™ KeyMod 8 SAEC™ System Carabiner Replica - Half Tan"

Description

Carabiner replica SA-B12 KeyMod 8″ SAEC™ system

The SA-B12-V2 carbine replica from Specna Arms was predominantly manufactured from a uniform zinc-aluminium alloy, whereby the most critical points of the replica were Steel elements (all screws, pins and the tactical suspension handle are made of steel). Both the SF stock, in which the battery is housed, and the pistol grip are made of polymer plastic. The housing of the replica has been Anodising process which guarantees a high level of corrosion protection for the replica. The replica itself was painted in Powder processafter the surface has been sandblasted. This method of applying paint ensures that the applied colour is much more abrasion-resistant than usual. The USMC markings were applied to the barrel.

The replica is Very well fitted - as is otherwise almost only known from G&P or Classic Army manufacturers - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, whose weight is also barely noticeable as soon as it rests on the shoulder.

The replica uses a New generation quick-change spring system, the so-called SAEC™. This enablesthe quick and efficient adjustment of the replica's performance to the expected conditions on the pitch, without the need for access to a workshop or a range of specialised tools. Replacing the spring is now even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be pulled out of the replica - It is sufficient to remove the piston guide (without tools - it is fixed with a screw ring and a bolt) and then unscrew the special pin underneath together with the spring guide bearing. The mainspring is replaced, the bolt is screwed back into the barrel, the piston is fitted and ... back into action! The whole process literally only takes a moment, and as I said: No tools required.

The advantages of the SAEC™-Systemscan hardly be overestimated. In view of the prevailing tendency throughout Europe to limit the speed at which vehicles can be dropped by law and the regulations in the municipalities themselves, this system guarantees the user a high degree of efficiency and freedom. The SAEC™ system allows with a minimum of time, the main springand thus adapt the exit speed of the replica to the playing surface in order to guarantee an ideal compromise between the effectiveness of the weapon and the safety of oneself and other players.

The replica has been fully adapted for operation with LiPo and LiFe batteries. With an initial discharge speed of ~430 FPS which is guaranteed by the factory-installed main spring, the replica is perfectly suited for use at medium distances. A M90 type spring is also included, which allows the initial speed to be reduced to ~310 FPS, making the replica perfect for short distance or indoor use.

The transmission, which is reinforced at cylinder head height, conceals a steel spring guide that is part of the SAEC™ Systems is and on 8mm ball bearings and pads Steel gears is mounted. The system is secured against reversing by four pawls. The lightweight plastic piston made of polycarbonate is equipped with a row of steel teeth to increase its strength. It also uses a Cylinder type 2 and Steel breakerand a Metal hop-up chamber.