Specna Arms SA-A90 ONE™ SAEC™ System carbine replica

Specna Arms SA-A90 SAEC™ System Assault Rifle Replica

SA-A90 assault rifle replica from Specna Arms is largely made of a uniform zinc and aluminium Aluminium-Alloy, reinforced with steel elements in the most sensitive areas of the replica (steel elements - all screws, pins and tactical sling swivels). Both the stock, which holds the battery, and the pistol grip are made of polymer. The receiver of the replica was the anodising process which guarantees a high degree of corrosion protection. The colour was Powder coating process after the surface had been sandblasted before the paint was applied. This ensures a much higher abrasion resistance of the applied paint than usual. The receiver carries Specna Arms markings.

The Parts of the replica fit together very well - The replica is also perfectly balanced in a way that was previously only seen in replicas from top manufacturers such as G&P or Classic Army. This allows for almost ideal manoeuvrability of the replica and the weight is hardly noticeable once the replica is shouldered.

The replica has a New generation quick-release system, the so-called SAEC™. Thanks to this system, it is possible to quickly and easily adjust the performance of the replica to the expected conditions on the pitch without having to have access to a workshop or a set of special tools. The spring change is even faster than the previous version of the system.

Thanks to the SAEC™ system the gearbox does not have to be removed from the replica- It is sufficient to remove the barrel and take out a special pin located underneath together with a spring slider on bearings. We replace the main spring, screw the pin back into the housing, attach the shaft and... we are back in play! The entire process only requires a long Phillips screwdriver to remove the shaft.
The advantages of the SAEC™ system can hardly be overestimated. Given the current tendency throughout Europe to utilise legal restrictions regarding the muzzle velocity of replicas or internal regulations within different groups, the system guarantees the user a wide range of options and a great deal of freedom. The SAEC™ system allows, the main spring with a minimum of time and thus adapt the muzzle velocity to the playing field in such a way that an ideal compromise between shooting effect and safety for the user himself and for other participants is guaranteed.

The replica is fully compatible with LiPo and LiFe Batteries. Due to the basic muzzle velocity of ~430 FPSThe high level of accuracy achieved by the manufacturer's standard built-in main spring makes the replica perfect for use at medium distances. The set also includes a M90 spring, which makes it possible to reduce the muzzle velocity to ~310 FPS and thus adapt the replica for use at short range and indoors.

A reinforced gearbox at cylinder level contains a steel spring carriage, which is an element of the SAEC™ system and is mounted on 8 mm steel ball bearings and washers. The system is secured with four anti-reverse locks. A lightweight polycarbonate piston is fitted with steel teeth to increase its durability. A type 2 cylinder and steel circuit breaker have also been fitted, as well as a metal hop-up chamber.

The upgraded version offers a range of new, reinforced parts such as:

- Reinforced steel gears
- Bearing-mounted steel spring slider
- Lightweight polymer piston with steel band
- Aluminium-reinforced piston head
- Metal cylinder head
- Reinforced metal nozzle

The replica is equipped with a 22 mm RIS rail and a fixed stock, which are characteristic of M16 replicas. The upper RIS rail is equipped with a folding metal sight that can be freely removed to make room for the attachment of an optoelectronic sight of your choice. The standard flash hider is based on a 14 mm left-hand thread, which allows a silencer to be fitted in its place.

The model has a modular Hand protection with a KeyMod-Assembly as well as standard threads that enable the attachment of classic RIS rail strips. Dedicated Segments, for example, Picatinny-Tracks (KeyMod-nuts) can be attached to the KeyMod be fastened Hand protection can be mounted in any position and configuration, as there are holes around the handle (KeyMod slots).

This is an airsoft version of the KeyMod Handles, the size may differ from the original. We do not guarantee full compatibility of KeyMod Handles with KeyMod Accessories.

To increase the realism of the game, the replica also has a functioning bolt catch mechanism.

The replica comes with a 300 BB Hi-Cap magazine made of steel. Its Colour sample corresponds to magazines for live firearms as typically used by armed forces.

SAEC™ system is included in the European patent with a number: 002639500

Additional accessories shown in the preview pictures are not part of the set!

The set does not include the battery or charger.

The set contains:

– Replica
- Magazine
- Fixed iron sights
- additional mainspring
- Cleaning rod

ATTENTION:

According to the report number HKGEC1600157401, the product fulfils the requirements of the European Union RoHS - Restriction of Hazardous Substances 2011/65/EU Directive Annex II and the 2002/95/EC amending directive concerning the restriction of hazardous substances in electronics.

This means that Specna Weapons Free from harmful materials like:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
– polybrominated Biphenyl (PBB)
– polybrominated Diphenyl ether (PBDE)